LAVA IRIS 505C FIRMWARE DOWNLOAD & INSTRUCTION HERE

Lava iris 505c firmware download .


Below you can get the direct link to download the Lava iris 505c stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .




How to flash

1-Download and extract the stock firmware on your computer.This rar file is  password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .

Firmware download here








LAVA_iris_505c_INT_S103_20160318

Here you have to know about the boot key

Press Volume + and insert data cable , Volume - and insert data cable  or even some model you have to insert cable and Insert battery to start the process .
7-Green ring will appear at the end of successful Flash .

Keep in mind

The above process only works with the stock firmware or Custom Rom which comes with the Scatter file in it ( basically mediatek devices ).

Backup please :- Take a backup of your important data before any operation throw Smart Phone Flash Tool as because during the flashing process your personal data including photos,message,contact will be removed permanently.

Must know :-Some firmware on Mediatek devices makes Imei null but that firmware we provide don't make imei damage , it is tested on many smartphone.

Requirements :- Your android smartphone should must have at-list  50-60 percent of battery to perform the flashing process .

Lava other hot firmware in on page here.

2 Comments

All comments are moderated. Don`t enter any spam link in the comment below.

  1. I have downloaded both stock and sp tools. But cant connect to computer.

    ReplyDelete
  2. Install the proper driver first and try.

    ReplyDelete
Previous Post Next Post