SP Flash Tool For FRP Unlock in MTK Without Data Loss.

SP Flash Tool For FRP Unlock in MTK - Bypass FRP


The term FRP is so popular nowadays since a large number of Android users are on the latest Android operating system. FRP-Factory Reset Protection is a security feature on Android 5 Lollipop and above devices that is triggered when a device with a synchronized Google account is reset via the recovery menu/fastboot. The device automatically flags it as a theft or an insecure action. So, after the reset, the device will prompt for the most recent synchronized Google account to be verified. It protects your device from unauthorized access but unfortunately, it can be bypassed.

Download SP Flashtool and Notepad++ Install Notepad++


Launch SP Flashtool and locate the scatter file inside the firmware/frp reset file folder.

• Click on the Format Tab Select Manual Format Locate the firmware folder, right click on the MT65xx Android Scatter.txt and select Edit with Notepad++.

• When it opens, press CTRL + F key and search for FRP. 

• Carefully note the values under linear_start_addr: and partition_size:

• Copy the value under linear_start_addr: and paste it in SP Flashtool format tab, inside.

• Begin Address[HEX]: e.g 0x6a00000 Copy the value under partition_size: and paste it in SP Flashtool Format tab, inside End Address[HEX]: e.g 0x100000 Cross check properly before hitting the Start button.

• Connect your device while it’s off and allow SP Flashtool to do it’s job.

• Click on Start.

• You should get a Format Ok when it’s done.

Disconnect your device and then turn it on. FRP has been removed successfully without any loss.