Hello friends we are going to show how to flash mi redme note3 (2015116 )Qualcomm based phone.After use third party software wifi,baseband,imei gone
.
Here we are going to show how to flash MI PHONE and repair BASEBAND and WIFI in a easy way.
.
Here we are going to show how to flash MI PHONE and repair BASEBAND and WIFI in a easy way.
Important Notes:
1. If you have older version of Miflash installed you will need first to uninstall it!
2. MiFlash is supporting only Qualcomm devices.
3. MiFlash not supporting devices older than Mi3.
How To Install:
Make sure first you uninstall the old Miflash tool from your system!
Double click the MiflashSetup.msi to start the installation
First screen click Next!
How To Flash Redmi Note 3 With Normal USB Cable
Step1.
Switch Off Mobile, Press Vol Down + Power Key For Fastboot Mode
Download Fastboot To EDL Files Here
- Now Run edl.bat To Enter EDL Mode
- Now Mobile Will off And Will Show 9008 Port In Device Manager
- What's new in this version:
- Install the driver properly.Every Qualcomm driver is not supported so use mi driver only.
Step3
Extract Firmware Folder On Desktop And Rename Folder
Step4
Open MiFlash Tool
Click On Select And Select Folder
Refresh For Scan Connected Phone And Start
Wait For Success Message .
To repair baseband.
Steps:-
First root the phone with kingo Root.Please note that on every reboot you need to root the phone
Open cmd
Give command :-adb shell
Give command :-su
Give command :-[ dd if=/dev/zero of=/dev/block/mmcblk0p13 ]
Give command :- [ dd if=/dev/zero of=/dev/block/mmcblk0p14 ]
Give command :-[ dd if=/dev/zero of=/dev/block/mmcblk0p20 ]
If no baseband then use QCN after 1st reboot
Redmi_Note_3.qcn
Reboot
Root again
Copy internal storage mmcblk026
This file
Bluetooth and wifi repair
Extract file
Give command :- [ dd if=/storage/sdcard0/mmcblk0p26 of=/dev/block/mmcblk0p26 ]
Reboot
Done
Tags:
Mi Fix