EBLUE.BERRY TAB B731 3G MT6572 FIRMWARE & INSTRUCTION HERE

MT6572__B731_3G__4.4.2__ALPS.KK1.MP7.V1.22

EBLUE.BERRY B731 firmware download .

Below you can get the direct link to download the EBLUE.BERRY B731 stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .

How to flash

1-Download and extract the stock firmware on your computer.This rar file is  password
protected .

2-After extracting you will find the Sp flash tool,if you don`t have download if from here and instruction manual.

3 Install the usb driver (skip if drivers are already installed) .

4-Open the Sp Flash Tool  and load the Scatter File from the firmware folder that you already extracted .

5-Connect the smartphone to the computer using the usb cable .

6-Click on Upgrade / Download button in the Sp Flash Tool to Begin the Flashing .


Here the back side image of tablet .

Here the board id ( B706_MB_V2.3_201202 )

Here you have to know about the boot key

Press Volume + and insert data cable , Volume - and insert data cable  or even some model you have to insert cable and Insert battery to start the process .

7-Green ring will appear at the end of successful Flash .

Keep in mind

The above process only works with the stock firmware or Custom Rom which comes with the Scatter file in it ( basically mediatek devices ).

Backup please :- Take a backup of your important data before any operation throw Smart Phone Flash Tool as because during the flashing process your personal data including photos,message,contact will be removed permanently.

Must know :-Some firmware on Mediatek devices makes Imei null but that firmware we provide don't make imei damage , it is tested on many Tablet.

Requirements :- Your android smartphone should must have at-list  50-60 percent of battery to perform the flashing process .

Firmware download here:-

B706_MB_V2.3_201202



Here the tool is:- Download

This file is password protected.Click here to find. 
Here