COLORS P30 FIRMWARE & INSTRUCTION

Colors P30 firmware


Below you can get the direct link to download the colors p30 stock firmware (flash file) from Google Drive.Firmware contains flash file only of different version .

https://drive.google.com/open?id=0B5516mBTP-V4d0V3TzZQcDlZWXM




 How to flash

 Download and extract the stock firmware on your computer.This Rar file is  password protected. After extracting you will find the Upgrade download tool,if you don`t have download if from here and instruction manual Install the USB driver (skip if drivers are already installed) .

Open the  Upgrade download tool  and load the PAC File from the firmware folder that you already  extracted .

  Connect the smartphone to the computer using the USB cable.
  Click on Start / Download button in the Upgrade download tool to Begin the Flashing .

    Here you have to know about the boot key.

    Press Volume + and insert data cable , Volume - and insert data cable  or even some model you have to insert cable and Insert battery to start the process . Pass message will appear at the end of successful Flash .


 Keep in mind

The above process only works with the stock firmware or Custom Rom which comes with the PAC File in it (basically spreadtrum based devices ).

Backup please :- Take a backup of your important data before any operation throw Software upgrade Tool as because during the flashing process your personal data including photos,message,contact will be removed permanently.

Must know :-Some firmware on spreadtrum devices makes Imei null but that firmware we provide don`t make Imei damage , it is tested on many smartphone.

Requirements :- Your android smartphone should must have at-list  50-60 percent of battery to perform the flashing process .

password :- thegsmsolution.blogspot.com

5 Comments

All comments are moderated. Don`t enter any spam link in the comment below.

Previous Post Next Post